Monday, September 3, 2012

winter coat : final muslin

Here we have the (almost ) final plan for my coat.    As I was looking at the pictures I remembered I need to add facings to the zippers, inside and out (important for determining fabric yardage) but you get the general idea.

It is a princess seam coat with center front zip, swoop pockets (anyone know the real name?) pit zips, arm zips, bi-swing back, hood, and when I do the final, a zillion little hidden pockets.

Sorry about the white-on-white.   The final will be a dark navy with electric blue lining which will photograph better.  Plus, I'll be able to go outside even if it is as rainy and gross as it is today.

This is just vanity - but it doesn't really pull as much as the lines and wrinkles suggest.  That is an artifact of having my hands in my pockets rather than letting the coat hang straight.  However, its pretty hot and I don't want to hop into this get-up again, so you'll have to trust me.





I've been enjoying going through my gear and figuring out what features I wanted to include.   Pit-zips allow you to vent heat without having to open up the whole coat, which can be quite handy on absurdly windy, wet or cold days.







I added the sleeve zippers to give me space to get my braces on and deal with all the layers without everything getting caught.    For once I will be able to put on a pair of gloves *after* I put on my coat.   This is huge.









 This is a terrible picture of a bi-swing back - but bear with me for a moment.    Have you ever seen a motorcycle jacket that has a gusset behind the shoulder blade, allowing freedom of movement without adding a lot of bulk to the sleek lines?  Well, that is call a bi-swing back (that took a fair bit of research to dig up)   There are a couple of ways to do them.   David Coffin presents one in his book on shirtmaking (pg. 152)  but I ended up going with one I found described (no pictures) on various sewing  and motorcycle jacket forums.   It is composed of two crescents which are attached to each other along the convex side and to the sleeve and jacket back along the concave sides.   To prevent the fabric from poufing out of the armscye permanently, the gusset is attached to the back (or to the opposing gusset) with elastic.   This way one can stretch without popping seams.




6 comments:

  1. I am loving all of the additional features with this coat. The pit vents, sleeve zippers and bi swing back are going to make for a fabulous and sturdy coat!

    ReplyDelete
  2. Hi there.. I know I'm really late to this party, but would you mind pointing me in the direction of the crescent-shaped bi-swing pattern? Or the forum you found it on? I have the Coffin book but the style I'm looking for is more leather jacket and less 40's army jacket like his version for shirts. I'd really appreciate any help you could give me. Your frankenpatterning is really fun too, I've been enjoying your posts.

    Thanks,
    Cae :)

    ReplyDelete
  3. Hi there.. I know I'm really late to this party, but would you mind pointing me in the direction of the crescent-shaped bi-swing pattern? Or the forum you found it on? I have the Coffin book but the style I'm looking for is more leather jacket and less 40's army jacket like his version for shirts. I'd really appreciate any help you could give me. Your frankenpatterning is really fun too, I've been enjoying your posts.

    Thanks,
    Cae :)

    ReplyDelete
    Replies
    1. I'm afraid I don't remember -- I vaguely recall pictures. To make mine, I think I took the curve of the back of the arm and used that to make the crescent. It really was very simple, just think of it as adding a shaped pocket - its more or less the same idea. If you can't get it, we can email or somesuch.

      Delete
    2. Turns out the Burda Larissa jacket has all the parts.. I took a look at that and it is as you describe.. something in my head was trying to make it an actual pleat instead of making a three-part section. Derp derp. I drafted the section I wanted into my standard shoulder and tonight I get to test fit that. If it doesn't work I'll try it using the armhole curve as you suggest, thanks!

      Delete

I love to hear from people :)

Related Posts Plugin for WordPress, Blogger...